www.nature.com/scientificreports
OPEN
Erratum: Influence of substrate modulus on gecko adhesion Mena R. Klittich, Michael C. Wilson, Craig Bernard, Rochelle M. Rodrigo, Austin J. Keith, Peter H. Niewiarowski & Ali Dhinojwala Scientific Reports 7:43647; doi: 10.1038/srep43647; published online 13 March 2017; updated on 24 April 2017 This Article contains an error in the legend of Figure 2 where the symbols corresponding to calculations using the spring model are incorrectly given as solid shapes. The Figure and accompanying Figure legend appear below.
Figure 2. Average maximum shear force of adhesion for whole animals on cellulose acetate ( ) and PDMS ( ) substrates of varying composite moduli. Composite moduli are calculated from the spring model ( , ) or from durometer measurements ( , ), and are tabulated in Table 1. Values are means ± standard error, n = 7.
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ © The Author(s) 2017
Scientific Reports | 7:46587 | DOI: 10.1038/srep46587
1
OPEN
Erratum: Influence of substrate modulus on gecko adhesion Mena R. Klittich, Michael C. Wilson, Craig Bernard, Rochelle M. Rodrigo, Austin J. Keith, Peter H. Niewiarowski & Ali Dhinojwala Scientific Reports 7:43647; doi: 10.1038/srep43647; published online 13 March 2017; updated on 24 April 2017 This Article contains an error in the legend of Figure 2 where the symbols corresponding to calculations using the spring model are incorrectly given as solid shapes. The Figure and accompanying Figure legend appear below.
Figure 2. Average maximum shear force of adhesion for whole animals on cellulose acetate ( ) and PDMS ( ) substrates of varying composite moduli. Composite moduli are calculated from the spring model ( , ) or from durometer measurements ( , ), and are tabulated in Table 1. Values are means ± standard error, n = 7.
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ © The Author(s) 2017
Scientific Reports | 7:46587 | DOI: 10.1038/srep46587
1
