Erratum: “Physical apparatus parameters and model for vibrating tube densimeters at pressures to 140 MPa and temperatures to 473 K” [Rev. Sci. Instrum. 85, 095111 (2014)] Eric F. May, Weparn J. Tay, Manuela Nania, Amos Aleji, Saif Al-Ghafri, and J. P. Martin Trusler Citation: Review of Scientific Instruments 86, 049902 (2015); doi: 10.1063/1.4919437 View online: http://dx.doi.org/10.1063/1.4919437 View Table of Contents: http://scitation.aip.org/content/aip/journal/rsi/86/4?ver=pdfcov Published by the AIP Publishing Articles you may be interested in Erratum: “Direct observation of spin-resolved full and empty electron states in ferromagnetic surfaces” [Rev. Sci. Instrum.85, 073901 (2014)] Rev. Sci. Instrum. 85, 109901 (2014); 10.1063/1.4897187 Physical apparatus parameters and model for vibrating tube densimeters at pressures to 140 MPa and temperatures to 473 K Rev. Sci. Instrum. 85, 095111 (2014); 10.1063/1.4894469 Erratum: “Neutron source reconstruction from pinhole imaging at National Ignition Facility” [Rev. Sci. Instrum.85, 023508 (2014)] Rev. Sci. Instrum. 85, 049902 (2014); 10.1063/1.4871590 Erratum: “CRISTAPRESS: An optical cell for structure development in high-pressure crystallization” [Rev. Sci. Instrum.85, 013906 (2014)] Rev. Sci. Instrum. 85, 029902 (2014); 10.1063/1.4866646 Erratum: New apparatus to perform fast determinations of mixture vapor–liquid equilibria up to 10 MPa and 423 K [Rev. Sci. Instrum. 5 7, 469 (1986)] Rev. Sci. Instrum. 58, 321 (1987); 10.1063/1.1139670

This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: http://scitationnew.aip.org/termsconditions. Downloaded to IP: 128.255.6.125 On: Thu, 11 Jun 2015 03:44:02

REVIEW OF SCIENTIFIC INSTRUMENTS 86, 049902 (2015)

Erratum: “Physical apparatus parameters and model for vibrating tube densimeters at pressures to 140 MPa and temperatures to 473 K” [Rev. Sci. Instrum. 85, 095111 (2014)] Eric F. May,1 Weparn J. Tay,2 Manuela Nania,2 Amos Aleji,2 Saif Al-Ghafri,2 and J. P. Martin Trusler2 1

Centre for Energy, School of Mechanical and Chemical Engineering, The University of Western Australia, Crawley, WA 6009, Australia 2 Department of Chemical Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ, United Kingdom

(Received 19 April 2015; accepted 20 April 2015; published online 30 April 2015) [http://dx.doi.org/10.1063/1.4919437] Unfortunately, Eqs. (26) and (27) of the original article1 were erroneous; the correct expressions are as follows:   (1 + βτ p) ρM +   , A=*  2 2 2 , S00τ00 -  (1 + ετ1t + ετ2t ) (1 + αV t + βV p)  ρM . B= S00 (1 + αV t + βV p)

(26) (27)

None of the other results or conclusions of the work are affected by this revision. 1E.

F. May, W. J. Tay, M. Nania, A. Aleji, S. Al-Ghafri, and J. P. M. Trusler, Rev. Sci. Instrum. 85, 095111 (2014).

0034-6748/2015/86(4)/049902/1/$30.00 86, 049902-1 © 2015 AIP Publishing LLC This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: http://scitationnew.aip.org/termsconditions. Downloaded to IP: 128.255.6.125 On: Thu, 11 Jun 2015 03:44:02